| Customization: | Available |
|---|---|
| After-sales Service: | Online |
| Warranty: | Online |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Product description
Control board wiring
1 .The opener should be install on the left side of the sliding door because it is set as clockwise when delivery . If needs to install on the right side of the sliding door ,the DIP switch 6 should be changed into the opposite side.
2. Disconnect the power and connect the wires by professionals
3 .Open the top cover of the motor, and connect the wires according to the following figure, then install the top cover again after debugging
| Model | SL1894 | SL0720 |
| Soft start and soft stop | Yes | Yes |
| Running time adjustable | Yes | Yes |
| Transmitter stored | 300 | 30 |
| Loading capacity | 1HP | 2HP |
| Electric lock | Yes | Yes |
| Auto close | Yes | Yes |
| Self-learning function | Yes | Yes |
| Output Power | AC 24V | AC 24V |
Safety Instruction
Please ensure that the using power voltage matches with the supply voltage of gate opener (AC110V or AC220V); kids are forbidden to touch the control devices or the remote-control unit. The remote-control unit is controlled by a single button mode or three button mode (please refer to the instructions of the remote control in accordance with the actual gate opener type). The indicator light on the remote-control unit will flicker when the button on it is pressed. Main engine and gate can be unlocked by disengagement wrench and the gate can move with manual operation after disengagement. Please ensure that no one is around the main engine or gate when the switch is operated and it is usually demanded to examine the stability of installation. Please temporarily stop using if the main engine needs repairing or regulation.
Packing and logist
){kind=link}