Hiland P5001 Best Outdoor Light Timers 24-Hour Timer with Gate Photocell Light Sensor

• Customization: Available
• Type: Infrared Sensor Switch
• Principle: Infrared
• Model NO.: P5001
• Standard: Standard
• Size: 73*43*25mm
• Certification: ISO, RoHS, CE
• Photocell: P5001
• Working Voltage: 12V-24V AC/DC
• Temperature Rane: -20c -60c
• Protection Index: IP54
• Photocell Wavelength: 940nm
• Receiver Range: More Than 20m
• Weight: 82g/Set
• CE: Approved
• Transport Package: Each in Individual White Box
• Specification: P5001
• Trademark: Hiland
• Origin: China
• Production Capacity: 10000PCS/Month

Product Description

I. Technical Specification

1. Working voltage: 12~24VAC/DC
2. Working current: 24VDC; emitter: ≤15mA    receiver: ≤30mA
3. Photocell wavelength: 940nm
4. Angle of opposite emission: ≤±5º
5. Receiver range: ≥15m
6. Working temperature: -20º~+60ºC
7. Relay contact loading capacity: 1A/30VDC
8. Waterproof grade: IP45
9. Size: 73*43*25mm

II. Safety Instruction

1. For security, please read the user manual carefully before initial operation;
2. Please be sure the power is off before connecting, the product is produced without fuse;
3. It is used only for the manual remote control and wireless control equipment / system, this system must not endanger life or property during the running failure or its security risks have been eliminated;
4. Please operate the product in effective receive range.

III. Installation Instruction

1. The product should be installed more than 20cm upper the ground, and the distance between emitter and     receiver shall be more than 0.5 meters;
2. Avoid direct sunlight to emitters and receivers among ±5º, or other direct strong light;
3. Avoid other photocell emitters within effective receive range;
4. If install many photo cells on the same line, can install receivers on two ends and then emitters in the middle back to back which can effectively avoid the third problem.
5. Installation firmly in order to avoid signal bias of emitters and receivers which will easily cause mis-operation.
6. Connecting power after checking no error of connecting lines, emitter LED lights, receiver NO/COM  connects while NC/COM disconnects Making the CAP of emitter and receiver align, receiver LED off, NC/COM connects while NO/COM disconnects. If the signal between emitter and receiver is interrupted, receiver LED lights, NC/COM disconnects while NO/COM connects.
Product Description
More options

Our exhibition
Company profile
Packing and shipping
FAQ
1. How can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;

3.What can you buy from us?
Transmitter,Tubular Motor Receiver,Sliding Gate Opener,Garage Door Opener,Photocell

3. Why should you buy from us not from other suppliers?
Hiland is professional designer and qualified manufacturer of the automatic door control systems.We have 15 years experience We
have sliding/garage/swing/rolling shutter opener and control systems,transmitters,receivers,photocell,flash lamp,keypad etc.

Q4.How can i get a price of needed garage door opener?
A: Please give the exactly size and quantity of your required door. We can give you a detail quotation based on your requirements.

Q5.We want to be your agent of our area. How to apply for this?
A: Please send your ideal and your profile to any e-mails of us .Let's talk more.