110V AC Group Tubular Motor Controller TM6299 for Door Control Systems

Product Description

Specification      

 1. Working voltage: 220VAC,50HZ        
 2. Loading capacity: 2HP,240VAC        
 3. Working frequency: 433.92MHz        
 4. Built-in fuse: electrocircuit (0.5A), motor (10A)        
 5. Temperature range: -20ºC to 60ºC.        
 6. Code:Rolling code     
 7. with external button and photocell protection        
 8. Size: 113×74×44MM    

 Safety Instruction      

1. For security, please read the instructions carefully before initial operation; making sure that the power is off before connection.
2. The received signal may be interfered by other communication devices. (e.g. the wireless control system with the same frequency range)            
3. It is forbidden to control the high-risk coefficient equipment / system. (e.g. cranes)            
4. It should be applied in dry indoor place or in the electric appliance place.            

 Set up    

1  Learning / memorizing transmitters:
Press the learning button on the panel,LED turns into red and gets into learning state;press the same button  twice on the same transmitter,LED blinks for a while and turns into green shows transmitter has been learned successfully.

2. Erasing Transmitter:
Continue pressing the learning button (about 8s) until LED turns green then release the learning button, LED turns red (about 1s) then turns green. It indicates that the erasing process is successful    

Operational process    

5.1 Three button control system with transmitter and non-Latch model  Button 1,2,3 in transmitter is in correspondence with open, close and stop.
5.2 Single button control system and non-Latch model  "Press-Open(motor works clockwise), press-stop, press-close(motor works anti clockwise),press-stop,and so on in a loop. Single-button control is only effective to the learned button; if a new button of transmitter learned into the control panel, the formal one is useless. (e.g.: if learned button 1 at first, and then button 2 or 3 the former button 1 becomes invalid)."
5.3 Infrared sensor protection, It only work when door closing. Motor stops after 1 second and reverse when photocell signal disconnecting during door closing. (External photocell PHOTO port connects photocell normally close switch)
5.4 with external switch, External switch is single button control.Press-Open(motor works clockwise), press-stop, press-close(motor works anti clockwise),press-stop,and so on in a loop. 

NOTE:    

1.Single-button control refers to single button in transmitter; in control panel is in correspondence with open, close and stop.
2. Max running time means that the motor's maximum running time at a time is 100S; the motor stops immediately if longer than 100S.    
3.  in control panel and OPEN STOP CLOSE button in transmitter are in correspondence with open, close and stop.           

More options

Our ExhibitionCompany profilePackaging And LogisticsFAQ
1. How can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;

3.What can you buy from us?
Transmitter,Tubular Motor Receiver,Sliding Gate Opener,Garage Door Opener,Photocell

3. Why should you buy from us not from other suppliers?
Hiland is professional designer and qualified manufacturer of the automatic door control systems.We have 15 years experience We
have sliding/garage/swing/rolling shutter opener and control systems,transmitters,receivers,photocell,flash lamp,keypad etc.

Q4.How can i get a price of needed garage door opener?
A: Please give the exactly size and quantity of your required door. We can give you a detail quotation based on your requirements.

Q5.We want to be your agent of our area. How to apply for this?
A: Please send your ideal and your profile to any e-mails of us .Let's talk more.